<form id="rbnhx"></form>

        <form id="rbnhx"><form id="rbnhx"><th id="rbnhx"></th></form></form>

          <form id="rbnhx"></form>

              • Technical Data
              • Hardware
              • Software
              • Manual
              • Certificate

              FSCUT3000

              FSCUT3000S system is designed for tube cutting control, support standard tube(retangle, circle, oval, ellipse and obround etc.) , free form , and steel channels(T/U/H/L shape) production of high precision and efficiency.

              Technical Data

              Model
              FSCUT3000S
              Software
              TubePro tube cutting software/ CypCut sheet cutting software
              Control card
              BMC1805
              Interface type
              32-bit PCI bus, 132MB/S
              I/O terminal board
              BCL3766
              Power supply
              24V DC/2A
              Motor control
              X/Y1/Y2/W axis pulse output, heighest frequency 3MHz
              X/Y1/Y2 axis access encoder feedback, highest sampling frequency 10MHz
              W axis port can be assigned to rotary axis or autofocus unit
              Work environment
              Temperature: 0-55 ℃
              5%-95% (no condensation)
              Dedicated input
              8 limit inputs:Positive and negative limit for X/Y1/Y2/W axis
              4 origin inputs:X / Y1 / Y2 / W axis origin
              Dedicated output
              2 DA: 0~10V,50mA
              1 PWM with 5V/24V for option, precision of 5KHz (0.1%)
              Common input
              15 inputs: 12 are low-level active, 3 inputs can jump-wire switch to high-level active.
              Common output
              8 relay output, load capacity 250V AC/5A, 30V DC/5A
              12 thyristor output, DC 24V/500mA

              Benefits

              Cutting technique
              Support offset tube center error in production to improve through holes cutting precision.
              Support steel channels cutting.
              Suppport seperate technique for corner cutting.
              Support auto loading/unloading process, cycle production and automatic tube feeding.
              Support all functions of FSCUT2000 system.
              Control performance
              Open-loop control system, Friendess 5th generation motion control algorithms.
              Trajectory accuracy 0.02mm, positioning accuracy 0.001mm, repeatability 0.003mm.
              Access encoder feedback in real time, to compare command and machine toolpath.

              Application

              Applied in tube cutting or tube-sheet combo machine. Widely used in furniture, display shelf, architecture, and sport equipment industries.

              FSCUT3000
              Components
              WKB Wireless hand-held remote
              WKB

              Number:1

              BCL3766 I/O terminal board
              BCL3766

              Number:1

              BMC1805 PCI Control card
              BMC1805

              Number:1

              Accessories
              C62-2/5/10 62-pin cable
              C62-2/5/10

              Number:1

              C37-2/5/10 37-pin cable
              C37-2/5/10

              Number:1

              C15-1.5/2.5/4 Servo cable
              C15-1.5/2.5/4

              Number:4

              TubesT TubesT
              TubesT is a 3D tube nesting software designed for CypTube/TubePro laser cutting system. From parts drawing and modification, full type compensation, strategic nesting to report generation, using TubesT will meet and exceed your production needs.
              V7.1.35.2
              TubePro TubePro
              TubePro designed for professional tube cutting, supports production of tube and profile of various shape. It works with TubesT nesting software seamlessly to realize technique setting, advanced toolpath generation and nesting for standard and special production need.
              V7.0.15.142
              TubesT-Lite TubesT-Lite
              TubesT-Lite is a free software to generate toolpath for FSCUT tube cutting system. It's designed for CypTube/TubePro, can import part from external igs file, draw the part of standard shape and array-nest the part on the tube.
              V1.27.1

              Welcome to contact us by email

              版權所有?上海柏楚電子科技股份有限公司 CopyRight?Shanghai Friendess Electronic Technology Co., Ltd.

              Friendess Co.,Ltd.reserves the right to modify the software version and description of product models on the website without prior notice

              滬ICP備14033040號-1

              版權所有?上海柏楚電子科技股份有限公司

              CopyRight?Shanghai Friendess Electronic Technology Co., Ltd.

              Follow us Disclaimer
              請使用電腦瀏覽器訪問
              快速赚钱的方法正规